PPP connection
10 отговора
26 прегледа
PPP connection
Със Red Hat 6.0 съм, използвам Kppp за dial-up conn...но когато се опитам да се свържа ми изплюва - "Password validation failure", а това е невъзможно,защото паролата е верна...какво може да е? проверих в /etc/ppp/ pap-secrets, но незнам дали Kppp е зависима от тях и pppd..помогнете... преди бях със Slack 4.0 Linux и всичко беше ок със Kppp...minicom също не мога да използвам,защото нещо умира...HELP!
в отговор на Mad Doctor
#2
PPP connection
Ami slacka si e slack wse pak, ne che iskam da obidq redhat-a. :)))
Ami slovi si opciqta na Autetikation{Pap Chap ...}
slovi q na kakwo to trqbwa nai-weroqtno problema e tam. A movesh i prosto da slovish terminal-based. Taka shte ti izwede terminal i shte te pita za login i parolka.
pozdrawi kgb
в отговор на Mad Doctor
#3
PPP connection
Ami izpolzwaj si pppd pod Redhat ili pyk se wyrni na Slackware -
po-dobrata distribuciq
в отговор на Mad Doctor
#6
PPP connection
И на мен ми правеше подобен проблем, затова си направих скрипт... работи много стабилно. /За РХ6 дистрибуция говоря/
в отговор на Mad Doctor
#8
PPP connection
na maila li ?
ami az moga da ti go nameria ama me myrzi da se razkarvam chak do Hdji Dimityr
:)
PPP connection
Ето ти /etc/ppp/ppp-on script -> demand dialing :))
#!/bin/sh
#
# Script to initiate a ppp connection. This is the first part of the
# pair of scripts. This is not a secure pair of scripts as the codes
# are visible with the 'ps' command. However, it is simple.
#
# These are the parameters. Change as needed.
TELEPHONE=xxx-xxx # The telephone number for the connection
ACCOUNT=username # The account name for logon (as in 'George Burns')
PASSWORD=passwd # The password for this account (and 'Gracie Allen')
LOCAL_IP=xxx.xxx.xxx.0 # Local IP address if known. Dynamic = 0.0.0.0
REMOTE_IP=xxx.xxx.xxx.129 # Remote IP address if desired. Normally 0.0.0.0
NETMASK=255.255.255.0 # The proper netmask if needed
#
# Export them so that they will be available at 'ppp-on-dialer' time.
export TELEPHONE ACCOUNT PASSWORD
#
# This is the location of the script which dials the phone and logs
# in. Please use the absolute file name as the $PATH variable is not
# used on the connect option. (To do so on a 'root' account would be
# a security hole so don't ask.)
#
DIALER_SCRIPT=/etc/ppp/ppp-on-dialer
#
# Initiate the connection
#
# I put most of the common options on this command. Please, don't
# forget the 'lock' option or some programs such as mgetty will not
# work. The asyncmap and escape will permit the PPP link to work with
# a telnet or rlogin connection. You are welcome to make any changes
# as desired. Don't use the 'defaultroute' option if you currently
# have a default route to an ethernet gateway.
#
exec /usr/sbin/pppd debug lock modem crtscts /dev/ttyS2 115200
asyncmap 20A0000 escape FF kdebug 0 $LOCAL_IP:$REMOTE_IP
noipdefault netmask $NETMASK defaultroute connect $DIALER_SCRIPT
ipcp-accept-local ipcp-accept-remote demand holdoff 30 idle 180
за REMOTE_IP си смени с IP na GateWay na ISP
за опциите на pppd :> man pppd
И chat скрипта :))
#!/bin/sh
#
# This is part 2 of the ppp-on script. It will perform the connection
# protocol for the desired connection.
#
exec /usr/sbin/chat -v
TIMEOUT 3
ABORT '
BUSY
'
ABORT '
NO ANSWER
'
ABORT '
RINGING
RINGING
'
''
AT
'OK-+++c-OK' ATH0
TIMEOUT 30
OK ATDT$TELEPHONE
CONNECT ''
Username: $ACCOUNT
Password: $PASSWORD
ако искаш можеш да си сложиш един ред в /etc/rc.d/rc.local
#BringUp Interface PPP0
/etc/ppp/ppp-on
:))
в отговор на Mad Doctor
#11
PPP connection
A, sluchayno nyakoy da znae kak da izlaja ppp-to da vdiga na n-ti pat, a ne samo na 1-vi. Na anal... tzentrala S0=5 ne moje da gi prebroi :-(