problem s eMule

imam problem ne moga da se svarga s nito edin server.postojano mi izpisva" Warning Byte Devils (66.98.192.99:3306) - You have a lowid. Please review your network config and/or your settings.".mislja 4e trjabva da si promenja porta.probvah na 6662,6666,80,4242 no pak nischto ne stana.ako njakoi znae na koi port moga da se svarga molja da mi kage.blagodarja.

Не знам дали ти е хардуерен (имаш някакво рутърче) или софтуерен
имаш нещо инсталирано на компютъра което играе ролята на стейтфул фаъруол.
Да не би да е някой от тези:
Zone Alarm
Kerio (winroute, personal firewall)
Sygate Firewall
Norton Firewall
и подобни
Кажи кое от тези неща имаш (ако имаш рутър също кажи каква марка и модел е) и може и да се опитам да ти помогна

ТОва са портовете на които работи еМулето, предполагам теб те вълнуват само инкоминг портовете (не знам как ти е сетнат файъруола може и аутгоинг да трябва да се сетнат.
Това за уеб интерефейса по-добре не го отваряй.
Абе с 2 думи трябва да отвориш
4662 TCP
4672 UDP


А това е от сайта на еМулето. Много яка програмка, доста филми си смъкнах с нея.
1) Local Port: 4662
Remote Port: any
Protocol: TCP
Direction: incoming
Purpose: Client Port / Connections from other clients, Client to Client Source Exchange

Note: You can change this port in Preferences -> Connection -> Client Port
This port has to be forwarded in a router. Changing this port in Preferences you must also change the forwarding in the router



2) Local Port: any
Remote Port: 4662
Protocol: TCP
Direction: outgoing
Purpose: Client Port / Connections to other clients, Client to Client Source Exchange

Note: 4662 is the default port, but other clients may have different settings. Change the remote port to any when configuring a firewall



3) Local Port: 4672
Remote Port: any
Protocol: UDP
Direction: incoming
Purpose: Clients source asking / extended eMule protocol, Queue Rating, File Reask Ping

Note: This port has to be forwarded in a router. Changing this port in Preferences you must also change the forwarding in the router.
If you are not able to forward this port check the disable box in Preferences -> Connection -> UDP Port



4) Local Port: any
Remote Port: 4672
Protocol: UDP
Direction: outgoing
Purpose: Clients source asking / extended eMule protocol, Queue Rating, File Reask Ping

Note: 4672 is the default port, but other clients may have different settings. Change the remote port to any when configuring a firewall

5) Local Port: any
Remote Port: 4661
Protocol: TCP
Direction: outgoing
Purpose: Connection to server


Note: 4661 is the default port of a server. Many server use different ports. Configuring a firewall the remote port again changes to any.



6) Local Port: any
Remote Port: 4665
Protocol: UDP
Direction: outgoing
Purpose: Source asking on servers
Note: Servers using the default port 4661 TCP (see #5) automatically set their port for source asking to 4665 UDP. If a server uses a different port in #5 the corresponding UDP port is set to [Connection Port + 4]. For firewalls the remote port here is any.



7) Local Port: 4711
Remote Port: any
Protocol: TCP
Direction: incoming
Purpose: Webserver
Note: This is the default port for the web interface. When using a router this port has to be forwarded or no connection to the webserver will be possible.

ma ne znam kade trjbva da vida. v preverences na eMule li trjbva da se vidi.

Емулето си е настроено да бачка по дефолт на тези портове.
Или имаш инсталиран файъруол или си с ВИндоуз ХР и ти е включен дефолт файъруола, него трябва да пипнеш.
Мулето не трябва да се пипа.
Първо разбери кой от тези фаъроли или виндозе ХР файъроул имаш и тогава го настрой да разрешава на еМулето да се конектва.
Що не питаш някой дето е близо до теб и разбира малко от тези неща?
Сам без да знаеш коя програма те блокира трудно ще се справиш.

s windows xp sam no ne namerih nikoi ot tjh

The Windows XP firewall is generally not recommended as it isa very basic form of firewall. If you want to use it anyway these steps are necessary:

1. Open eMule
2. Click Preferences > Connection
3. Write down the client port value (default 4662)
4. Also note the UDP port value (default 4672)
5. Close eMule and your internet connection
6. In On Windows XP click Start, and then click My Network Places.
7. Go to Network Tasks, click View Network Connections. (Alternatively, you can right-click My Network Places and click Properties.)
8. Right-click the connection you use for the Internet and choose Properties
9. Click the Advanced tab, and then click Settings.
If the Settings button is unavailable, ICF is not enabled on this connection and you do not need to open any ports (they are all already open).
10. Click Add to open a new port.
11. Type a name in the Description box, for example, "eMule : TCP Incoming".
12. Type 127.0.0.1 in the Name or IP address of the computer hosting this service on your network box. You can specify the IP address of an internal computer; however, in most cases, you use 127.0.0.1
13. Type the client port you wrote down in step #3 in the External port and Internal port boxes.
14. Choose TCP, and then click OK.
15. Click Add to open a new port again.
16. This time choose a name like "eMule : UDP Incoming"
17. see #12
18. Now External port and Internal port is the value you noted in step #4.
19. Choose UDP, and click OK.
If you change your client port later, you need to reconfigure the rule above on your firewall.
For additional information, click the article numbers below to view the articles in the Microsoft Knowledge Base:

Q308127 How to Manually Open Ports in Internet Connection Firewall in Windows XP
Q283673 How to Enable or Disable the Personal Firewall Feature in Windows XP
Q307554 Programs Require Manual Port Configurations with Internet Connection Firewall

(this nice ICF how to was adopted from -nRoK-. Thanks)

ne moga da nemerq moite mesta za mrega.nqmam ikonka Windows xp.mogesch li da mi napischesch gore dolo kakvo predstavlqva tazi ikona.

Ако си на немски Виндозе се казва Netzwerkumgebung


_ _ _

Time is like a drug. Too much of it kills you.