Slack 9 restart

Инсталирах Slack 9 - full install.Проблема е като че като бутна (от дискета понеже имам и XP на харда) логвам се и след 5 секунди машината рестартира.И това е постоянно .Нямам много опит със Линукс и за това се обръщам за идеи и предложения тук.Предполагам че проблема може би е от видеото-ATI RADEON 7000 TV out.Ако имате идеи помагайте.Ако трябва ощe инфо за машината 1.7 CEleron ,256 DDR ,Gbyte MB, 13 G hdd

благодаря предварително

Mojesh li da kajesh koe e poslednoto suobshtenie koeto wijdash na ekrana?

последните два реда са
Starting sendmail ....
starting gpm/usr/sbin/....
Welcome to Linux 2.4.20 (tty1)
login:
Предполагам че проблема можеби идва и от gpm (mouse servera) някъде бях чел че дава грешки.Опитах се да го disable /etc/rc.d/rc.gpm но ми дава че
-bash Command not found
или може би е друг проблема

след като бутне и зареди промта максимум 5-6 секунди и рестартира
просто не знам как да го направя и да го запиша за това време на дискета
Днес ще се опитам да го преисталирам без това gpm да видим какво ще се получи

Преди да преинсталирваш. опитай следното:
зареди от инсталационния диск система в RAM-а (т.е. все едно започваш нова инсталация)
След това вместо разделяне на диска или да пишеш setup монтирай дяла в който ти е Линукса примерно:
mount /dev/hda5 /mnt (или mount -o rw /dev/hda5 /mnt -o rw )
след което влез в /mnt/etc/rc.d и chmod a-x rc.gpm
Може да направиш и chmod a-x rc.hotplug и да пробваш по-късно на ръка да зареждаш модулите. Особено ако си пуснал hotplug-а и някой от неговите модули прави мизерии.
Може да отидеш в /mnt/var/log и да прегледаш messages и syslog да видиш кой модул ти прави проблем (или този преглед да го направиш по-късно след рестариране и вход в системата - тогава гледаш в /var/log директорията).
Ако окриеш проблемния модул и държиш на hotplug просто го слагаш този модул в /etc/hotplug/blacklist файла

Ako imash sumneniq za gpm - spri go ot /etc/rc.d/rc.M.
I naistina kakto kazaha w postinga po dolu - bootni ot CD to i vij kakwo kazvat /var/log/messages i /var/log/system

Моята дистрибуция ли е нещо кофти или действително липсва сорса на ядрото?
На инстал диска не откривам К# пакет изобщо. Потърсих го след като казах да се инсталира, а не открих после сорса, нито ми даде грешка при инсталацията, че му му липсва нещо.

Вероятно другите са взели iso-тата от
[линк]

От README файла:
...
The *official* ISO is what Patrick Volkerding build. I downloaded
this ISO from ftp.slackware.com. The difference between *official*
and *unofficial* -install ISOs is only one.
On the official - k/ series (kernel) are excluded.
On the unofficial - t/ series (tetex) are excluded, instead.
On both -install ISOs - kdei/ series are excluded.
...

Ахааа, значи грешката е вярна, не съм се заблунил.

Прави сте, че липсва k директорията в диска който съм теглил от slackware.com, но и аз не съм обърнал внимание.

Преинсталнах го без gpm-a и след това mount-nah дяла по долу са и syslog-a i messages но не открих или поне на мен много не ми говорят тези съобщения
може да ги погледнете ако вие имате други идеи Забравих dmesg да запиша

== syslog
Aug 25 17:43:36 digital kernel: Linux version 2.4.20 (root@midas) (gcc version 3.2.2) #2 Mon Mar 17 22:02:15 PST 2003
Aug 25 17:43:36 digital kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Aug 25 17:43:36 digital kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Aug 25 17:43:36 digital kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Aug 25 17:43:36 digital kernel: BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
Aug 25 17:43:36 digital kernel: BIOS-e820: 0000000017ff0000 - 0000000017ff3000 (ACPI NVS)
Aug 25 17:43:36 digital kernel: BIOS-e820: 0000000017ff3000 - 0000000018000000 (ACPI data)
Aug 25 17:43:36 digital kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Aug 25 17:43:36 digital kernel: On node 0 totalpages: 98288
Aug 25 17:43:36 digital kernel: zone(0): 4096 pages.
Aug 25 17:43:36 digital kernel: zone(1): 94192 pages.
Aug 25 17:43:36 digital kernel: zone(2): 0 pages.
Aug 25 17:43:36 digital kernel: Kernel command line: BOOT_IMAGE=vmlinuz ramdisk_size=7000 root=/dev/hda6 vga=normal ro
Aug 25 17:43:36 digital kernel: Detected 1716.938 MHz processor.
Aug 25 17:43:36 digital kernel: Console: colour VGA+ 80x25
Aug 25 17:43:36 digital kernel: Calibrating delay loop... 3420.97 BogoMIPS
Aug 25 17:43:36 digital kernel: Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Aug 25 17:43:36 digital kernel: Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Aug 25 17:43:36 digital kernel: Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
Aug 25 17:43:36 digital kernel: CPU: Intel(R) Celeron(R) CPU 1.70GHz stepping 03
Aug 25 17:43:36 digital kernel: POSIX conformance testing by UNIFIX
Aug 25 17:43:36 digital kernel: mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
Aug 25 17:43:36 digital kernel: mtrr: detected mtrr type: Intel
Aug 25 17:43:36 digital kernel: Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge
Aug 25 17:43:36 digital kernel: Initializing RT netlink socket
Aug 25 17:43:36 digital kernel: Starting kswapd
Aug 25 17:43:36 digital kernel: pty: 512 Unix98 ptys configured
Aug 25 17:43:36 digital kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Aug 25 17:43:36 digital kernel: ICH4: IDE controller on PCI bus 00 dev f9
Aug 25 17:43:36 digital kernel: PCI: Device 00:1f.1 not available because of resource collisions
Aug 25 17:43:36 digital kernel: ICH4: chipset revision 2
Aug 25 17:43:36 digital kernel: ICH4: not 100%% native mode: will probe irqs later
Aug 25 17:43:36 digital kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
Aug 25 17:43:36 digital kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
Aug 25 17:43:36 digital kernel: hda: ST313021A, ATA DISK drive
Aug 25 17:43:36 digital kernel: hdc: SAMSUNG CD-R/RW DRIVE SW-248B, ATAPI CD/DVD-ROM drive
Aug 25 17:43:36 digital kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Aug 25 17:43:36 digital kernel: ide1 at 0x170-0x177,0x376 on irq 15
Aug 25 17:43:36 digital kernel: blk: queue c0388784, I/O limit 4095Mb (mask 0xffffffff)
Aug 25 17:43:36 digital kernel: hdc: ATAPI 48X CD-ROM CD-R/RW drive, 8192kB Cache, UDMA(33)
Aug 25 17:43:36 digital kernel: ide-floppy driver 0.99.newide
Aug 25 17:43:36 digital kernel: RAMDISK driver initialized: 16 RAM disks of 7000K size 1024 blocksize
Aug 25 17:43:36 digital kernel: ide-floppy driver 0.99.newide
Aug 25 17:43:36 digital kernel: kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Aug 25 17:43:36 digital last message repeated 2 times
Aug 25 17:43:36 digital kernel: 8regs : 1975.600 MB/sec
Aug 25 17:43:36 digital kernel: 32regs : 1242.400 MB/sec
Aug 25 17:43:36 digital kernel: pIII_sse : 2256.400 MB/sec
Aug 25 17:43:36 digital kernel: pII_mmx : 1990.800 MB/sec
Aug 25 17:43:36 digital kernel: p5_mmx : 1937.200 MB/sec
Aug 25 17:43:36 digital kernel: raid5: using function: pIII_sse (2256.400 MB/sec)
Aug 25 17:43:36 digital kernel: VFS: Mounted root (ext2 filesystem) readonly.
Aug 25 17:43:36 digital kernel: i810_audio: Audio Controller supports 6 channels.
Aug 25 17:43:36 digital kernel: i810_audio: AC'97 codec 0, new EID value = 0x05c7
Aug 25 17:43:36 digital kernel: i810_audio: AC'97 codec 0, DAC map configured, total channels = 6
Aug 25 17:43:36 digital kernel: i810_rng: RNG not detected

=== messages
Aug 25 17:43:34 digital syslogd 1.4.1: restart.
Aug 25 17:43:35 digital /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/204
Aug 25 17:43:35 digital /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/204
Aug 25 17:43:35 digital /etc/hotplug/usb.agent: Setup usbcore for USB product 0/0/0
Aug 25 17:43:35 digital last message repeated 5 times
Aug 25 17:43:36 digital kernel: klogd 1.4.1, log source = /proc/kmsg started.
Aug 25 17:43:36 digital kernel: BIOS-provided physical RAM map:
Aug 25 17:43:36 digital kernel: 383MB LOWMEM available.
Aug 25 17:43:36 digital kernel: Initializing CPU#0
Aug 25 17:43:36 digital kernel: Memory: 385840k/393152k available (1733k kernel code, 6924k reserved, 568k data, 112k init, 0k highmem)
Aug 25 17:43:36 digital kernel: Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Aug 25 17:43:36 digital kernel: Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Aug 25 17:43:36 digital kernel: CPU: L1 I cache: 0K, L1 D cache: 8K
Aug 25 17:43:36 digital kernel: Enabling fast FPU save and restore... done.
Aug 25 17:43:36 digital kernel: Enabling unmasked SIMD FPU exception support... done.
Aug 25 17:43:36 digital kernel: Checking 'hlt' instruction... OK.
Aug 25 17:43:36 digital kernel: PCI: PCI BIOS revision 2.10 entry at 0xfa460, last bus=2
Aug 25 17:43:36 digital kernel: PCI: Using configuration type 1
Aug 25 17:43:36 digital kernel: PCI: Probing PCI hardware
Aug 25 17:43:36 digital kernel: PCI: Using IRQ router PIIX [8086/24c0] at 00:1f.0
Aug 25 17:43:36 digital kernel: PCI: Found IRQ 11 for device 00:1f.1
Aug 25 17:43:36 digital kernel: Linux NET4.0 for Linux 2.4
Aug 25 17:43:36 digital kernel: Based upon Swansea University Computer Society NET3.039
Aug 25 17:43:36 digital kernel: VFS: Diskquotas version dquot_6.4.0 initialized
Aug 25 17:43:36 digital kernel: Journalled Block Device driver loaded
Aug 25 17:43:36 digital kernel: Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
Aug 25 17:43:36 digital kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A
Aug 25 17:43:36 digital kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A
Aug 25 17:43:36 digital kernel: Real Time Clock Driver v1.10e
Aug 25 17:43:36 digital kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31
Aug 25 17:43:36 digital kernel: PCI: Found IRQ 11 for device 00:1f.1
Aug 25 17:43:36 digital kernel: ICH4: BIOS setup was incomplete.
Aug 25 17:43:36 digital kernel: hda: 25434228 sectors (13022 MB) w/512KiB Cache, CHS=1583/255/63, UDMA(66)
Aug 25 17:43:36 digital kernel: Uniform CD-ROM driver Revision: 3.12
Aug 25 17:43:36 digital kernel: Partition check:
Aug 25 17:43:36 digital kernel: hda: hda1 hda2 < hda5 hda6 hda7 >
Aug 25 17:43:36 digital kernel: Floppy drive(s): fd0 is 1.44M
Aug 25 17:43:36 digital kernel: FDC 0 is a post-1991 82077
Aug 25 17:43:36 digital kernel: loop: loaded (max 8 devices)
Aug 25 17:43:36 digital kernel: SCSI subsystem driver Revision: 1.00
Aug 25 17:43:36 digital kernel: md: linear personality registered as nr 1
Aug 25 17:43:36 digital kernel: md: raid0 personality registered as nr 2
Aug 25 17:43:36 digital kernel: md: raid1 personality registered as nr 3
Aug 25 17:43:36 digital kernel: md: raid5 personality registered as nr 4
Aug 25 17:43:36 digital kernel: raid5: measuring checksumming speed
Aug 25 17:43:36 digital kernel: md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
Aug 25 17:43:36 digital kernel: md: Autodetecting RAID arrays.
Aug 25 17:43:36 digital kernel: md: autorun ...
Aug 25 17:43:36 digital kernel: md: ... autorun DONE.
Aug 25 17:43:36 digital kernel: LVM version 1.0.5+(22/07/2002)
Aug 25 17:43:36 digital kernel: NET4: Linux TCP/IP 1.0 for NET4.0
Aug 25 17:43:36 digital kernel: IP Protocols: ICMP, UDP, TCP
Aug 25 17:43:36 digital kernel: IP: routing cache hash table of 4096 buckets, 32Kbytes
Aug 25 17:43:36 digital kernel: TCP: Hash tables configured (established 32768 bind 65536)
Aug 25 17:43:36 digital kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Aug 25 17:43:36 digital kernel: Freeing unused kernel memory: 112k freed
Aug 25 17:43:36 digital kernel: Adding Swap: 666656k swap-space (priority -1)
Aug 25 17:43:36 digital kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Aug 25 17:43:36 digital kernel: Linux Kernel Card Services 3.1.22
Aug 25 17:43:36 digital kernel: options: [pci] [cardbus] [pm]
Aug 25 17:43:36 digital kernel: isapnp: Scanning for PnP cards...
Aug 25 17:43:36 digital kernel: isapnp: No Plug & Play device found
Aug 25 17:43:36 digital kernel: Intel PCIC probe: not found.
Aug 25 17:43:36 digital kernel: Databook TCIC-2 PCMCIA probe: not found.
Aug 25 17:43:36 digital kernel: ds: no socket drivers loaded!
Aug 25 17:43:36 digital kernel: Intel 810 + AC97 Audio, version 0.21, 15:37:49 Mar 11 2003
Aug 25 17:43:36 digital kernel: PCI: Found IRQ 5 for device 00:1f.5
Aug 25 17:43:36 digital kernel: PCI: Sharing IRQ 5 with 00:1f.3
Aug 25 17:43:36 digital kernel: i810: Intel ICH4 found at IO 0xe400 and 0xe000, IRQ 5
Aug 25 17:43:36 digital kernel: ac97_codec: AC97 Audio codec, id: 0x414c:0x4720 (Unknown)
Aug 25 17:43:36 digital kernel: i810 TCO timer, v0.05: timer margin: 30 sec (0x4060) (nowayout=0)
Aug 25 17:43:36 digital kernel: usb.c: registered new driver usbdevfs
Aug 25 17:43:36 digital kernel: usb.c: registered new driver hub
Aug 25 17:43:36 digital kernel: hcd.c: ehci-hcd @ 00:1d.7, Intel Corp. 82801DB USB EHCI Controller
Aug 25 17:43:36 digital kernel: hcd.c: irq 9, pci mem d8892000
Aug 25 17:43:36 digital kernel: usb.c: new USB bus registered, assigned bus number 1
Aug 25 17:43:36 digital kernel: ehci-hcd.c: restricting 64bit DMA mappings to segment 0 ...
Aug 25 17:43:36 digital kernel: ehci-hcd.c: USB 2.0 support enabled, EHCI rev 1. 0
Aug 25 17:43:36 digital kernel: hub.c: USB hub found
Aug 25 17:43:36 digital kernel: hub.c: 6 ports detected
Aug 25 17:43:36 digital kernel: uhci.c: USB Universal Host Controller Interface driver v1.1
Aug 25 17:43:36 digital kernel: uhci.c: USB UHCI at I/O 0xd000, IRQ 11
Aug 25 17:43:36 digital kernel: usb.c: new USB bus registered, assigned bus number 2
Aug 25 17:43:36 digital kernel: hub.c: USB hub found
Aug 25 17:43:36 digital kernel: hub.c: 2 ports detected
Aug 25 17:43:36 digital kernel: uhci.c: USB UHCI at I/O 0xd400, IRQ 5
Aug 25 17:43:36 digital kernel: usb.c: new USB bus registered, assigned bus number 3
Aug 25 17:43:36 digital kernel: hub.c: USB hub found
Aug 25 17:43:36 digital kernel: hub.c: 2 ports detected
Aug 25 17:43:36 digital kernel: uhci.c: USB UHCI at I/O 0xd800, IRQ 11
Aug 25 17:43:36 digital kernel: usb.c: new USB bus registered, assigned bus number 4
Aug 25 17:43:36 digital kernel: hub.c: USB hub found
Aug 25 17:43:36 digital kernel: hub.c: 2 ports detected
Aug 25 17:43:36 digital kernel: usb-uhci.c: $Revision: 1.275 $ time 15:38:38 Mar 11 2003
Aug 25 17:43:36 digital kernel: usb-uhci.c: High bandwidth mode enabled
Aug 25 17:43:36 digital kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
Aug 25 17:43:39 digital sshd[856]: Server listening on 0.0.0.0 port 22.

problema spored men e v tova: i810 TCO timer, v0.05: timer margin: 30 sec (0x4060) (nowayout=0)

dokolkoto sum chuval ima greshka tochno tam ... ili neshto takova.

mahni watchdog-a ot kernela ili go napravi software-watchdog. i mislia che vuprosa shte se razreshi.

uspeh

Проблема се реши.Цялата работа идва от hotplug-a.Disable и е ок системата.
Благодаря на всички за помощта

ОК радвам се, че си нещата са ОК. Може да пробваш да забраниш зареждането на този модул в blacklist-а както писах по-горе, за да не ти прави мизерии. Или ако пробваш да минеш на slackware current може да се е решил проблема