From: chas campbell <xx@xx>
* Date: Aug 21, 2007 1:55 PM
* Subject: how I created power
* First build a flywheel that will produce at least twice as much
energy as you need to drive your alternator when finished you should
have trouble seeing it moving as it runs in its own space, After a few
trial runs i built one by having a h-t steel shaft keeyed each end
before a flange or a disc was slipped along to the center and welded
the flange was then drilled and tapped to take studs, using a router i
cut a circle 600mm in diameter out of custom board with a hole in the
center to take the shaft this was attached to the flange using studs
with washers and lock nuts the second circle had a hole in the center
large enough to fit over the flange this was fitted from the other end
and screwed to the first wheel by doing this i could try diffrent
speeds and drives until i was satisfied i had a combination that would
work with what i had which was a .075 hp single phase electric motor
and a 3.5 kva alternator.
* The flywheel ended up being 72mm thick and 590mm in diameter i
then fitted a steel band around my wheel this added more power my
theory being if you create centrifugal force you can drive anything as
long as the wheel keeps spinning I ended up with an alternator fitted
with a 4.5inch pulley driven by a 9inch pulley the alternator speed
was 3146rpm at that speed it was easy to run electrical appliances for
a period now to the most important part to keep the wheel spinning i
wanted to build a power grid which had a single power supply to a
switch that worked on a rotating system to this i would have 6
identical electric motors connected they would all drive to a common
shaft in the center - imagine a clock with your motors situated at
1-3-5-7-9-11, The switch would direct power to one motor at a time
with a overlap that provided power to the second before the first was
switched off this means one motor is working while the others are
cooling down - on this drive shaft i would have a smaller flywheel to
compensate the power required to drive 6 sets of belts as the motors
are like the alternator they require very little power to spin - Drive
this shaft at approx half the speed of your motors from this shaft
double your speed to your main flywheel then using pulleys as large as
possible drive your alternator - All you need then is a simple device
that prevents your alternator (from) producing more power then your
system is capable of maintaining.
* I tried very hard to create enough interest in my invention to
be able to fund the end product but i feel i am wasting my time so
hopefully one of you good people will have more luck then me ,as for
testing one of my original machines it would be a waste of time as no
mater who tested it it would not satisfy everybody thanks for your
interest and good luck,Chas
* PS I would like this passed on to as many as possible.

Съдържаниет е скрито
Влезте за да го видите

Съдържаниет е скрито
Влезте за да го видите

Съдържаниет е скрито
Влезте за да го видите