|
|
|
Тема
|
 CAMWARE
|
|
| Автор | i_n_m (Нерегистриран) |
| Публикувано | 14.02.07 15:42 |
|
|
Tarsia info za Camware 3.30.
Ako niakoi znae neshto izobshto za neia neka pishe
Predvaritelno blagodaria
| |
|
Тема
|
 Re: CAMWARE
[re: i_n_m]
|
|
| Автор | MiRu (Нерегистриран) |
| Публикувано | 14.02.07 16:48 |
|
|
"CAMWARE MC Version 3.2
No major problems known.
CAMWARE TC (excluding 640MT) Version 3.1
The following problem was discovered too late to be rectified for this CAMWARE release:
For the 640T control, when working in Inch unit mode, C axis data in MGV and MMP units will be displayed 10 times too large on the control if the program is transferred from CAMWARE to the 640T control using binary file (CMT I/O) or 3 digit G code format.
(Conversely, if the program is transferred from the 640T control to CAMWARE using binary file (CMT I/O) or 3 digit G code format, then C axis data in MGV and MMP units will be displayed 10 times too small in CAMWARE).
A patch file will be issued to the relevant Mazak personnel for distribution in due course.
CAMWARE TC (640MT) Version 3.1
The following functions have not been implemented in this first release version of CAMWARE for the 640MT control:
Point Cutting Pattern Digitising
Milled Square, Milled Circle & Arbitrary Shape Geometry Selection
View by Unit
EIA/ISO Export"
Търся само файла setup.exe зa 3.2
MiRu
| |
|
| 
|
|
